Skip to content
(02) 4646 1660 Contact

Polyaspartic floor coatings

Polyaspartic coatings cure fast, stay colour-stable in sunlight and resist chemicals and stains, so they suit topcoats over epoxy, external walkways and floors that must be back in use quickly. Hychem PA300 is recoatable in 4 hours; PA330 is walkable in 12 hours at 23 °C and rated −20 to 50 °C in service.

What the floor has to handle

Sunlight
UV-stable, non-yellowing, high gloss
Cure
PA300 recoatable in 4 hours; PA330 walkable in 12 hours at 23 °C
Temperature
PA330 service −20 to 50 °C, applied at 15–35 °C
Wear
scratch, stain and chemical resistant

6 products

Standards that apply

Standards that apply — Polyaspartic floor coatings
StandardTitleWhat it means for the floor
AS 4586-2013Slip resistance classification of new pedestrian surface materialsClasses a new floor: P0–P5 on the wet pendulum, R9–R13 on the oil-wet ramp, A–C for wet barefoot areas. Ask for the class the area needs, not just "non-slip".

Which product holds which certificate: certifications and approvals.

FAQs about polyaspartic floor coatings

Polyaspartic or epoxy?

Epoxy builds thickness and chemical resistance at lower cost; polyaspartic cures faster and does not yellow outdoors. They are often used together — epoxy base, polyaspartic top.

Can it be used outside?

Yes. PA300 and PA330 are aliphatic and resist long-term weathering: balconies, walkways, steps and driveways.

Can it be made slip resistant?

Yes — add a suitable aggregate to meet the slip-resistance specification for the area.

Specification service

Not sure which system?

Tell us the substrate, the traffic and the service conditions — we recommend the build-up and write the specification.