Skip to content
Back to the app
(02) 4646 1660 Contact

Hychem Motortuff — Epoxy floor system for motor workshops, 2–3 mm

Technical data sheet (PDF)

Role in a system: Complete systemWhere this product sits in a floor build-up, from primer to topcoat. A complete system covers every layer.

Product description

Hychem Motor-Tuff is a high-build, heavy-duty, oil and impact resistant floor topping system designed specifically for commercial motor workshops. Hychem Motor-Tuff is a unique 5-stage system that has been formulated to provide superior resistance to chipping and delamination from falling heavy tools, keeping your workshop in state-of-the-art condition year after year.

Typical applications

  • MOTOR WORKSHOPS
  • SPARE PARTS STORAGE
  • CAR WASH AREAS
  • BROAD AREA CARPARK SURFACES & RAMPS
  • DETAILING AREAS
  • DISPLAY AREAS

Application guidelines

Summary from the data sheet — follow the PDF on site.

System build-up — MOTOR -TUFF @ 2mm-3mm+ DFT

REPAIR – In some cases it may be necessary to repair uneven or damaged substrates prior to the application of the Motor-Tuff system. Where the repair or re-surfacing of an area is required we suggest using either our Hychem GP epoxy binder / mortar or one of our Velosit polymer modified cement based repair mortars or levelling compounds.

PRIME – prime the prepared surface with Hychem GP epoxy and broadcast with 1mm aggregate at 50% coverage.

SCREED LAYER – apply a scratch coat of Hychem GP at 1mm and broadcast with a 1mm quartz aggregate at 100% coverage.

COLOUR COAT – apply 2 coats of Hychem SF20 at 3m² & 5m² per litre per coat in the selected colour.

LINE-MARKING – apply 2 coats of Hychem epoxy line-marking at this stage.

CLEAR COAT – apply a final transparent coat of either Hychem PA Glaze 3 or PA500 at 7 m² per litre.

Preparation

It is important that all new or old concrete surfaces are thoroughly prepared before the application of any coating system. It is highly recommended that any surface preparation is carried out in accordance with industry standards and publications such as NACE 02203 item No. 22420 or ICRI Technical Guideline No. 03732.

Application

Application techniques vary depending on the product being applied and the film thickness of the system.

Sealers and coatings are normally either spray or roller applied whilst high build 1mm+ topping systems are usually applied by a combination of roller and trowel.

The thickness of the installed system will influence the durability and ultimate service life of the system.

Product & system selection

Refer to each specific Hychem technical data sheet for more detailed information regarding the application of individual products or systems.

Hychem floors can be cleaned using a mechanical scrubbing machine or similar using alkaline based cleaning agents for best results. All floors should be thoroughly rinsed with clean water following this procedure.

Hychem offer a full system specifications service upon request.

Full product warranties can be provided by Hychem where required provided that suitable specifications are followed.

How to specify Hychem Motor-Tuff “Install Hychem Motor-Tuff 2-3mm DFT floor systemas to the suitably prepared substrate”.

Nominate the desired P or R slip resistant rating required.

If you require any assistance, Hychem can provide you with a full system specification upon request.

Questions about Hychem Motortuff

Coating or topping for a workshop?

A topping. Motortuff is a 5-stage, 2–3 mm system made to resist chipping and delamination from dropped heavy tools, which a thin coating would not survive. Motortuff Premium goes to 5 mm.

Where is Hychem Motortuff used?

Hychem Motortuff is used for: Motor workshops; Spare parts storage; Car wash areas; Broad area carpark surfaces & ramps; Detailing areas; Display areas. See Automotive workshop flooring.

Where is the Hychem Motortuff data sheet?

Download the Hychem Motortuff technical data sheet (PDF). For the safety data sheet, request it and we send it the same day.

Who installs Hychem Motortuff?

Hychem Motortuff is supplied by Hychem and laid by an approved applicator from our national network — jobs of any size, in every state. How supply and installation works.

Similar systems

Other Heavy Duty Industrial Solutions systems for automotive workshops.

All Heavy Duty Industrial Solutions